Analog Way V-Scale C - VSL300 - Manual (Page 13)

VSL range Chapter 1 : INTRODUCTION (continued)
PAGE 13
1-11. V-SCALE C FRONT PANEL DESCRIPTION
LCD CONTROL
ENTER: Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
FREEZE:
A short push allows to freeze the displayed output.
INPUT SELECTION: Selection of the 3 input sources.
VIDEO: Video source selection.
COMPUTER: Computer source selection.
NOTE: A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-12. V-SCALE C REAR PANEL DESCRIPTION
AUDIO:
1 & 2: Audio stereo input 1 & 2 on a MCO connector.
L: Left, R = Right.
OUT: Audio stereo output on a MCO connector.
VIDEO & COMPUTER INPUTS:
VIDEO: Composite Video, S.VIDEO, YUV, RGsB or RGBS input on a BNC female connector.
COMPUTER: Computer input on a HD15 female connector.
DISPLAY OUTPUT: DATA output (RGBHV, RGBS or RGsB) on a HD15 female connector.
RS-232:
RS-232 communication port on a DB9 female connector.
+5 Vdc:
DC input connector.