9. v-scale front panel description, 10. v-scale rear panel description – Analog Way V-Scale C - VSL300 User Manual
Page 12

Chapter 1 : INTRODUCTION (continued)
VSL range
PAGE 12
1-9. V-SCALE FRONT PANEL DESCRIPTION
LCD CONTROL
ENTER:
Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
FREEZE:
A short push allows to freeze the displayed output.
INPUT SELECTION: Selection of the 3 input sources.
C.V:
Composite source #1 selection (Input #1).
Y/C - C.V:
S.VIDEO source or Composite source #2 selection (Input #2).
COMPUTER:
Computer source selection (Input #3).
NOTE: A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-10. V-SCALE REAR PANEL DESCRIPTION
AUDIO:
1
, 2 & 3:
Audio stereo input 1, 2 & 3 on MCO connectors.
L: Left, R = Right.
OUT
:
Audio stereo output on a MCO connector.
VIDEO & COMPUTER INPUTS:
1 C.V:
Composite Video input #1 on a BNC female connector.
2 C.V:
Composite Video input #2 on 2xRCA female connectors.
Y/C:
S.VIDEO (Y/C) input on 2xRCA female connectors or a 4-pin mini DIN female connector.
3 COMPUTER:
Computer input on a HD15 female connector.
DISPLAY OUTPUT: DATA output (RGBHV, RGBS or RGsB) on a HD15 female connector.
RS-232:
RS-232 communication port on a DB9 female connector.
+5 Vdc:
DC input connector.