Analog Way Scan Vision VHX II - VHX480 - Manual (Page 7)

SCAN VISION VHX II ™ Chapter 3 : TECHNICAL DESCRIPTION
PAGE 7
Chapter 3 : TECHNICAL DESCRIPTION
3-1. FRONT PANEL
POWER: LED indicating that the POWER is ON.
FREEZE: Allows to Freeze the displayed OUTPUT.
PAL / NTSC: Allows to select the video output standard (PAL or NTSC).
ANTI-FLICKER: Allows to select a level of anti-flicker (1, 2 or 3).
STD. / OVER. / ZOOM: Allows to select a ZOOM MODE.
STD. = standard image (underscan).
OVER. = the image is OVERSCAN (10 % bigger than in standard mode).
ZOOM = the image can be enlarged up to 200 %.
POS/SIZE: Allows to select the POSITION or SIZE adjustment mode.
¥ ¦ : Horizontal and Vertical image adjustments. Act on the position or size of the image
according to the selected POS/SIZE mode.
LOCKED: Input format recognition LED.
LED OFF: No source is detected onto the computer input.
LED ON: A source is detected and is compatible with the input range frequency.
3-2. REAR PANEL
POWER INPUT: Standard IEC connector (100-250 VAC, 1 A, 50-60Hz).
COMPUTER IN: Computer (PC, MAC, WORKSTATION) input on HD15 female connector.
COMPUTER OUT: Computer output (data monitor...) on HD15 female connector.
75Ω/Hi-Z (RGB): RGB input load. Set this button on Hi-Z if you connect a monitor on the
COMPUTER OUT connector. If not set it on 75Ω.
VIDEO OUTPUTS
S.VIDEO: S.VIDEO (Y/C) output on a 4-pins mini DIN connector.
NTSC / PAL: COMPOSITE VIDEO output (PAL or NTSC) on a BNC connector.
RGB/S: RGB/S video output on 4 BNC connectors.
REMOTE CONTROL RS-232: Standard Remote Control on 5-pins MCO male connector.