AMETEK MXCTSH Administrator Manual - Manual (Page 9)

MX Compliance Test System System Administrator Manual
2.2 Password
The configuration password is shown here. Note that this password is not case sensitive.
Cal_lock
2.3 Changing General Configuration Settings
Open the Configuration program as described before. After entering your name, enter the
password in the password entry box. Then click on the "View/Update calibration information"
button. The same configuration data will be shown only this time, changes can be made. When
the configuration screen is closed, all changes made are stored in the test_summary.mdb
database along with the login name and date.
This information is also covered by the MXCTSH User Manual (P/N 7003- 972) or MXCTSL User
Manual (P/N 7003- 973). Refer to this manual for further information on this screen.
2.4 Changing Hidden Configuration Settings
Open the Configuration program as described before. After entering your name, enter the
password in the password entry box. Then double-click on the empty space between the
"View/Update calibration information" and the "Cancel and exit program" button. This will reveal
a hidden button labeled "View/Update limit information". Next click on this hidden button to bring
up the hidden configuration data screen. When the configuration screen is closed, all changes
made are stored in the test_summary.mdb database along with the login name and date.
Revision B 9