AMETEK MXCTSH Administrator Manual - Manual (Page 26)

MX Compliance Test System System Administrator Manual
4.4.2 MXCTS Uncertainty - Flicker
2
:
Flicker Uncertainty
Pst 5 % Reading
Plt 5 % Reading
dc 5 % Reading
dt 5 % Reading
dmax 5 % Reading
Table 4-2: MXCTS Measurement Uncertainty - Flicker
4.5 Adding Uncertainty Information to MXCTS Test Reports
If desired, the uncertainty information regarding the CTS measurement system may be added to
the test reports generated by the CTSMXH or L software. To do so, edit the report templates
located in the "C:\Program Files\California Instruments\Ctsmxh\report_files\templates" or
"C:\Program Files\California Instruments\Ctsmxl\report_files\templates" subdirectory. Use the
File, Open menu in MS Word and select any of the Hnnnnnn.doc or HA14nnnnn.doc (for
Harmonics reports) or F1000000.doc or F300000.doc (for Flicker) report templates.
Add a page at the end to the report containing the table information above and save the
templates as MS Word docs under the same name. You may want to save the original template
docs under a different name before doing so.
Once updated, future reports will automatically include this information.
2
Uncertainty data is given for products under test that exhibit a Power Factor of 0.75 < PF or PF < - 0.75.
Revision B 26