American Time SiteSync IQ - Manual (Page 8)

© American Time
8
SiteSync IQ Installation Manual
POWER INPUT
DATA ANTENNA
Back - UPS ES 550
Surge Pr otection
Power On Replace Battery
Battery Backup+ Surge Protection
System Controller with Internal Transmitter and Campus Antenna
System Controller, External Transmitter and Campus Antenna
The System Controller with 5 and 10 watt internal transmitter can also be connected to the campus antenna for improved coverage, especially
where multiple buildings are being covered by a single transmitter.
Systems with 25 watt and higher power external transmitters come standard with the campus antenna.
1. Choose a suitable location for the System Controller, following the
safety precautions on Page 1:
a. Place the System Controller indoors.
b. Locate within 45 ft. of planned location for antenna.
c. Locate near an electrical outlet (120vac).
d. Rack or shelf mount.
e. If you have a sync option, review the applicable
installation guidelines.
2. Install the campus mount antenna per the instructions on
Page 9.
3. Connect the cables to the System Controller:
a. Connect the antenna cable with adapter to the TX ANT
port.
b. Connect the power supply to the POWER INPUT port.
c. Connect the power supply to 110v electrical supply
(American Time recommends using surge
protector/battery backup Part No. H002717A shown).
4. Turn on the power to the System Controller:
a. Place the rocker switch on the back of the unit to the ON
position.
b. Confirm that the backlit display on the front of the unit
lights up and displays text.
5. Follow the Setup Wizard instructions on pages 10-13.
1. Choose a suitable location for the System Controller and the
External Transmitter, following the safety precautions on Page 1:
a. Place the System Controller indoors.
b. Locate units within 4 ft. of each other and within 45 ft. of
planned location for campus antenna.
c. Locate near an electrical outlet (120vac).
d. Rack or shelf mount.
e. If you have a sync option, review the applicable installation
guidelines.
2. Install the campus mount antenna per the instructions on Page 9.
3. Connect the cables to the System Controller and External
Transmitter:
a. Connect the 9-pin data cable between the EXT TX port on
the System Controller and the DATA port on the external
transmitter.
b. Connect the power cord to the External Transmitter.
c. Connect the power supply to the POWER INPUT port on
the System Controller.
d. Connect the power cords of both units to 110v electrical
supply (American Time recommends using surge protector/
battery backup unit H002717A shown).
4. Power up the External Transmitter
a. Place the rocker switch on the back of the unit (under "Power
Input" label) to the position marked " I".
5. Power up the System Controller:
a. Place the rocker switch on the back of the unit to the ON
position.
b. Confirm that the backlit display on the front of the unit
lights up and displays text.
6. Follow the Setup Wizard instructions on pages 10-13.
Back - UPS ES 550
Surge Pr otection
Power On Replace Batt ery
Battery Backup+ Surge Protection
Glossary
Appendix
Tr
oubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
Campus Transmitting Antenna and
External Transmitter Installation
H002717A
H002717A
External Transmitter
System Controller