Wired signal circuit option, Programming special events (continued), 3g 3f – American Time SiteSync IQ User Manual
Page 29: 3j 3i
29
© American Time
SiteSync IQ Installation Manual
Wired Signal Circuit Option
Glossary
Appendix
Troubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
w
Programming Special Events (continued)
Event Menu
Choose:
1=Set Date (1-31)
2=Set Weekday(s)
3e
e. Press
1
to select a day of the month and bring up the Select Event
Date screen.
f. Enter a 2-digit day of the month or 00 for all days and press
O
.
Pressing
2 in the Choose Screen (3e) brings up the Select Day screen.
At this screen:
Press
1
-
7
keys to add or remove days individually
or Press
8
to add weekdays,
9
to add weekends.
Press
O
to accept the assigned days.
g. The Select Event Time screen appears. To program start time:
Use the number keys to enter hour and minute.
Press
<
for AM or
>
for PM.
Press
O
to accept the event start time.
The Event Duration screen appears. To program event duration (1-9 seconds):
h. Press any number
1
-
9
to specify duration
or Press
0
to use the default duration(s) for the circuit(s) assigned to the
schedule
or Press
>
to latch assigned circuits on until a later event turns them off,
or Press
<
to turn off assigned circuits that were previously turned on.
Press
O
to accept event duration.
The Countdown Duration screen apprear:
i. Enter the countdown duration using the keypad or the
<>
scroll
keys. Press
O
.
n
Note: This countdown duration is only applicable if you have an
SQAxxxxxxC(1-6) digital clock. A countdown duration of 0 disables this feature.
The Message Number screen appears:
j. Enter the message number (see Page 27) using the keypad. Press
O
.
n
Note: This message number is only applicable if you have an SQAxxxxxxC(1-6)
digital clock. A message number of 0 disables this feature.
The Choose Schedule screen reappears:
k. Press
O
to accept the schedule number.
l. The Event Saved screen briefly appears followed by the Select Event
Time screen.
To see a programming example, see Appendix D.
Press
B
exit the Event Menu.
Event Menu
Duration 0=Default
2 Sec (1-9,
Off=< On=> OK=Set
3h
Event Menu
Choose Schedule
Sch=01 Select 1-99
OK=Accept
3k
Event Menu
Select event time:
Evt Time: 12:00 AM
MTWTF OK=Acpt
Event Menu
Select event date
Day of month= 15
All=00 OK=Accept
3g
3f
Event menu
Message Number
0 (0-5)
0=Disable OK=Accept
Event menu
Countdown Duration
0 Min (0-59 Min)
<>=Scroll OK=Accept
3j
3i
Event Menu
Y=All M=All
MTWTF 05:03 AM
Event 0000 Saved
3l
MON MAR 10 2014
10:38:06 AM USCT
American Time
Status=AUTO ETH=Y