American Time SiteSync IQ - Manual (Page 71)

71
© American Time
SiteSync IQ Installation Manual
Appendix F: USB Flash Drive
Glossary
Appendix
Troubleshooting
Clock
Installation
System Contr
oller
Installation
Intr
oduction
USB Update Programming
u
Insert USB drive into the bottom slot of Port A.
n Note: Ensure USB drive only contains the .BIN file.
v
Enter Service Lock when prompted. Press O .
w
Press O to update software.
x
Wait approximately 4 minutes for update.
y
The Main screen is displayed when the update is complete.
n Note: Latest firmware updates require version 0.5.8.15 or higher to
be installed on the unit. If a version older than firmware 0.5.8.15 is on
the System Controller, you will need to upgrade to firmware 0.5.8.15
first, otherwise the System Controller will not recognize the flash drive
when inserted; the Update Software prompt will not be displayed. If
the user attempts to manually force the firmware update through the
Configuration Menu, there will be a prompt warning that the file size is
too large.
Config Menu
Enter Service Lock:
XXXX
PROG=Exit OK=Enter
Config Menu
Flash Drive Action
Update Software
<>=Scroll OK=Accept
MON FEB 10 2014
10:38:06 AM USCT
American Time
Circts=Auto GPS=S