American Time AllSync IQ - Manual (Page 8)

© American Time
8
AllSync IQ Installation Manual
Glossary
Appendix
Tr
oubleshooting
Installation
Intr
oduction
AllSync IQ Setup Wizard
Programming Procedure (cont)
To set the time display mode for the AllSync IQ, select 12/24 Hr Mode.
• Press 1 for 12 hour mode-AM/PM (1:00 PM)
• Press 2 for 24 hour mode-Military (13:00)
Use the keypad to Enable DHCP or Disable to select static IP entry.
• Press 1 for enable DHCP
• Press 2 for disable DHCP
• Press O to accept
If you chose enable, skip to
If you chose disable continue to
Set Menu 12/24 Mode
Choose Mode: 1
1=12 HR (AM/PM)
2=24 HR (Military)
14
14
Use the keypad to enter the Unit IP Address. This is a static address
assigned by your Network Administrator. Enter preceding zeros as necessary.
•
Unit IP Address:
• Press O
Use the keypad to enter the Subnet Mask. This is the subnet mask of your
network. Enter preceding zeros as necessary.
•
Subnet Mask:
• Press O
Use the keypad to enter the Gateway IP. This is the IP address of your
network's Gateway device. Enter preceding zeros as necessary.
•
Gateway IP:
• Press O
Use the keypad to enter the Time Server address. Enter preceding zeros as
necessary.
•
Time Server Address:
• Press O
OR Press O to accept the default set at the factory from the
list of known good Internet Time Servers in Appendix A.
Use the keypad to enter the Alternate Time Server address. Enter preceding
zeros as necessary.
•
Alt. Time Server Address:
• Press O
OR Press O to accept the default set at the factory from the
list of known good Internet Time Servers in Appendix A.
16
16
15
17
Comm Menu
Enter Gateway IP
192.168.010.099
<=Bksp OK=Done
Comm Menu
Enter Subnet Mask
255.255.255.000
<=Bksp OK=Done
Comm Menu
Time Server Address
131.107.013.100
<=Bksp OK=Done
Comm Menu
Unit IP Address
192.168.001.001
<=Bksp OK=Done
18
17
20
19
16
15
18
19
20
19
1:49
FRI OCT 3 2014
:45 AM
American Time 800-328-8996
Comm Menu
DHCP
1=Enable
2=Disable Ok=Done
Comm Menu
Alt Time Srvr Addr
173.014.055.009
<=Bksp Ok=Done