Wired signal circuit programming, Wired signal circuit option, Programming events (keypad interface) – American Time AllSync IQ User Manual
Page 15: Programming recurring events by weekday, Programming new events
15
© American Time
AllSync IQ Installation Manual
Glossary
Appendix
Troubleshooting
Installation
Intr
oduction
Programming Events (Keypad Interface)
Wired Signal Circuit Option
The AllSync IQ Master contains 6 integrated signal relays. When configured, the Signal Circuit Option allows the System Controller
to be used for operating bells, tone generators, lighting circuits and other electrical equipment.
n
Note: AllSync IQ masters with the Ethernet option can also be programmed via the Remote Connect web interface (see page 25).
Definitions:
An
Event is programmed into the AllSync IQ master with time and date information, as well as a duration or a start/stop command.
For example, Event 0001 may be programmed to execute every Monday, Wednesday and Friday at 10:00 am for 3 seconds. Each
event is assigned to a
Schedule. The AllSync IQ Master can store up to 9,999 events. The event duration is programmable from
1 to 9 seconds and also allows for ON or OFF commands. Normal events are recurring weekday events. A
Special Event contains
date information that is not specific to weekdays. For example, you can set a special event for the 4th day of every month, the 4th
day of every January or the 4th day of January in a specific year. You can also set a special event for every Thursday in January
or every Thursday in a specific year. A
Schedule Change Event is entered in the same manner as a Special Event. A schedule
change event allows you to change from one schedule to another. This may be useful for changing from a normal schedule to a
holiday schedule.
A
Schedule is a group of events. For example, a school might program Schedule 01 with 4 events for their morning Elementary
recess schedule. The AllSync IQ Master allows for 99 unique schedules, with any number of events in each (up to a maximum total
of 9,999 events). Schedules, with groups of events, are assigned to
Circuits.
A
Circuit is defined as one of the 6 relay outputs on the AllSync IQ Master. Each circuit can be assigned one schedule at a time. For
example, Schedule 01 with 4 events might be assigned to Circuit 1 and Schedule 03 with 10 events might be assigned to Circuit 2.
v
Programming Recurring Events by Weekday
u
Programming New Events
For a non-special event, this brings up the Event Time screen.
To program start time:
a. Use the number keys to enter the hour and minute. Press
<
for AM or
>
for PM. Press
O
to accept the event start time.
The Event Duration screen appears. To program event duration (1-9 seconds):
b. Press any number
1
-
9
to specify duration, or
Press
0
to use the default duration(s) for the circuit(s) assigned to the
schedule, or
Press
>
to latch assigned circuits on until a later event turns them off, or
Press
<
to turn off assigned circuits that were previously turned on.
Press
O
to accept event duration.
a. Press:
P2
, enter User Lock using the keypad and press
O
to
enter the Event Menu.
b. Press:
1
to add an event.
c. Select the number of the schedule for the new event and press
O
.
d. If any events have already been assigned to the selected schedule, the
days and start time for the first event are displayed. Use the
>
key to
move to the New Event screen. Press
O
to display the Select
Weekdays screen.
n
Note: Press
<
on the first event to view the last event. Press
>
to move
to the New Event Screen.
e. To program event days, press
1
through
7
keys to add or remove
days individually, or
Press
8
to add weekdays (shown),
9
to add weekends, or
Press
0
for special events or schedule change events. This allows events to
be defined by date(s). Please reference section 3 (Programming Special
Events) and 4 (Programming Schedule Change Events) for details.
Press
O
to accept the assigned days.
Event menu
Duration 0=Default
2 Sec (1-9, < or >)
Off=< On=> OK=Set
Event menu
Select event time:
Evt Time: 12:00 AM
MTWTF OK=Acpt
Select Weekdays:
8=M-F
MTWTF
9=S+S Key 1234567
0=Spec/Sch OK=Accpt
Event Menu
Sch=10 Event=0000
2008-02-12 12:04 AM
Event Menu
Choose Schedule
Sch=01 Select 1-99
OK=Accept
Event Menu
View Events by
1=Schedule/Event
2=Date/Tme
3=WKDY
2b
2a
1e
1d
1c
1a&b
1:49
FRI OCT 3 2014
:45
AM
American Time
800-328-8996