Wired signal circuit option, 6b 6a, 6d 6c – American Time AllSync IQ User Manual
Page 19
19
© American Time
AllSync IQ Installation Manual
Glossary
Appendix
Troubleshooting
Installation
Intr
oduction
z
Reviewing and Editing Events by Schedule
a. From the "View Events by" screen (4), press
1
to select Schedule/Event
screen.
Key in a schedule number and press
O
. If there are existing events
assigned to the schedule, the days and start time for the lowest numbered
event are displayed.
Use the
<
and
>
keys to scroll through screens for all existing events
or enter an event number to move immediately to that event.
Press
B
to exit the Event Menu. Press
M
to delete the event. Press
O
to view the Select Weekdays screen.
b. This screen shows the days previously assigned to the event. To change
event days:
Press
1
-
7
keys to add or remove days individually, or
Press
8
to add weekdays, or
Press
9
to add weekends, or
Press
0
to edit a special event (this will lead to the series of screens for
defining special events).
Press
O
to accept the assigned day. For recurring events this brings up the
Event Time screen.
c. This screen shows the start time of the event. To change start time:
Use the number keys to enter hour and minute.
Press
<
for AM or
>
for PM.
Press
O
to accept the event start time. This brings up the Event
Duration screen.
d. To program event duration (1-9 seconds):
Press any number
1
-
9
to specify duration, or
Press
0
to use the default duration(s) for the circuit(s) assigned to the
schedule, or
Press
>
to latch assigned circuits on until a later event turns them off, or
Press
<
to turn off assigned circuits that were previously turned on.
Press
O
to accept event duration.
Press
O
to save event changes.
To see a programming example, see Appendix D.
Select Weekdays:
8=M-F MTWTF
9=S-S Key 1234567
0=Special OK=Accept
Event Menu
Sch=01 Event=0000
2008-02-15 12:04 AM
6b
6a
Event Menu
Duration 0=Default
2 Sec (1-9,
Off=< On=> OK=Set
Event Menu
Select event time:
Evt Time: 12:00 AM
MTWTF OK=Acpt
6d
6c
Wired Signal Circuit Option
1:49
FRI OCT 3 2014
:45
AM
American Time
800-328-8996