Adtec digital EN-20 (version 2.03.06) Manual - Manual (Page 27)

System Menu
The following diagram illustrates the structure and flow of the System Menu on the Adtec
EN-20 device:
Login
Item Function Options API Command
Login If the front panel is in a
‘logged out’ state, all
configurations are read
only. User must login to
change values. N/A N/A
Login
Duration Specifies the time-out
value for automatically
logging out of the front
panel once a user logs
in for security purposes.
Setting a time of 0
disables automatic
logout capabilities 0 - 9 ( minutes ) *.SYSD LDR
Network Sub-menu
Item Function Options API
Command
Ethernet
IP Address IP address of unit on your network user-defined using
arrow> and
buttons
default is
192.168.10.48*.SYSD IPAEthernet
MaskDefines the unit relative to the rest of
your networkuser-defined using
arrow> and
buttons
default is
255.255.255.0 *.SYSD IPA
Ethernet
Mask Defines the unit relative to the rest of
your network user-defined using
arrow> and
*.SYSD IPM
Ethernet
DHCP Dynamic Host Configuration Protocol;
allows the device to self-locate network
Ethernet parameters On (finds own DHCP
Address)
Off (defaults to last
entered IP Address) *.SYSD
DHCP