Adtec digital EN-20 (version 2.03.06) Manual - Manual (Page 11)

**If combining EN20-QM1-01 and EN20-VE2-01 options, ensure QAM tuners are able to
decode MPEG-4 Transport Streams**
Chapter 2 - Getting Started
Front Panel
The Function Buttons and Directional Keypad of the EN-20 are used to configure and
monitor the signal input and output of the device.
Panel Diagram
Front Panel LCD
There are 3 states of the front panel LCD.
1) Encoding State: When in normal encoding mode, the LCD will display the following
information. Since there are 2 encoders in the product, you can view the status of each by
pressing the down button to toggle between 1 & 2.
2) Video Loss State: When video is not detected on the selected input, the LCD will display
the following information.