Zilog ZUSBOPTS - Manual (Page 32)

UM026203-0115 Linix Motor Wiring Information
MultiMotor Series Development Kit
User Manual
25
Linix Motor Wiring Information
The Linix 3-phase BLDC motor included with the MultiMotor Series Development Kit
provides three heavy-gauge wires for phase connections and five lighter-gauge wires used
to power and access internal sensors, as indicated in Table 17.
1. The sensor wires are slightly smaller in diameter than the motor phase wires.
2. The Linix 45ZWN24 30 W motor provided with this kit is a relatively simple, low-
cost BLDC motor with Hall sensors. This motor will function with the hardware and
firmware included in this kit; however, this motor may not be the best choice for all
applications. If a different motor is used, the hardware and firmware may need to be
optimized for that particular motor.
Table 17. Motor Wiring Information
Wire Description
20 gauge white wire Motor Phase_A connection.
20 gauge blue wire Motor Phase_B connection.
20 gauge green wire Motor Phase_C connection.
22 gauge red wire Sensor Power.
22 gauge black wire Sensor Ground.
22 gauge white wire Sensor Signal_A connection.
22 gauge blue wire Sensor Signal_B connection.
22 gauge green wire Sensor Signal_C connection.
Notes: