Appendix c – Zilog Z51F3221 User Manual
Page 50
UM025801-1112
OCD Driver Installation on Windows XP Systems
Z51F3221 Development Kit
User Manual
43
Appendix C. OCD Driver Installation on
Windows XP Systems
The driver programs for the Z8051 On-Chip Debugger are copied during the software and
documentation installation. In the following procedure for Windows XP systems, ensure
that the target side of the OCD will remain unconnected while you install these drivers.
1. Connect the OCD hardware to the USB port of your PC by connecting the A-Male end
of one of the two USB A (male)-to-Mini-B cables with the host PC’s USB port, and
connect the Mini-B end to the OCD device.
2. After the PC detects the new hardware, it will display the
Found New Hardware Wiz-
ard
dialog box, shown in Figure 37. Select
Install from a list or specific location
(Advanced)
; then click
Next
.
Figure 37. The Found New Hardware Wizard Welcome Screen