Vectronics VEC-1012K - Manual (Page 9)

VEC-1012K Owner’s Manual
9
Your kit has 16 fixed-value resistors. We'll begin by mounting these now--
starting with the smallest value and moving to the largest. Before mounting each
one, carefully bend both leads close to the resistor body to form right-angles, as
shown below:
.4"
! ! Find a 22 ohm resistor (red-red-black). Install at R3 and solder.
! ! Find a 270 ohm resistor (red-violet-brown). Install at R4 and solder.
! ! Find a 470 ohm resistor (yellow-violet-brown). Install at R2 and solder.
Locate two (2) 2.2K resistors (red-red-red).
! ! Install a 2.2K at R11 and solder.
! ! Install a 2.2K at R14 and solder.
Locate two (2) 4.7K resistors (yellow-violet-red).
! ! Install a 4.7K at R7 and solder.
! ! Install a 4.7K at R17 and solder.
Locate two (2) 10K resistors (brown-black-orange).
! ! Install a 10K at R5 and solder.
! ! Install a 10K at R18 and solder.
Locate two (2) 39K resistors (orange-white-orange).
! ! Install a 39K at R12 and solder.
! ! Install a 39K at R15 and solder.
! ! Find a 47K resistor (yellow-violet-orange). Install at R8 and solder.
Locate four (4) 100K resistors (brown-black-yellow).
! ! Install a 100K at R1 and solder.
! ! Install a 100K at R9 and solder.
! ! Install a 100K at R13 and solder.
! ! Install a 100K at R19 and solder.