Vectronics VEC-821K - Manual (Page 9)

VEC-821 K Instruction Manual
Super CWV Filter Kit
PARTS PLACEMENT DIAGRAM
Figure 1
STEP-BY-STEP ASSEMBLY
Before assembling your kit, please take time to read and understand the VEC kit
warranty printed on the inside cover of this manual. Also, read through the
assembly instructions to make sure the kit does not exceed your skill level.
Once you begin construction, your kit will be non-returnable. Finally, if you
haven't already done so, please verify that all parts listed in the inventory are
included. If anything is missing or broken, refer to the warranty instructions for
replacing missing or damaged parts.
Note that part designators, such as R1, C3, etc., appear on a silk-screened
l e g e n d o n t h e c o m p o n e n t -mounting side of the printed circuit board. This
corresponds with the parts placement page in the manual. All parts will be
inserted on the silk-screen side of the board.
If you have last-minute questions about what you need to build your kit, please
refer back to the section titled "Tools and Supplies". If you're ready to begin now,
here we go!