Vectronics VEC-821K User Manual
Page 14
VEC-821K Instruction Manual
Super CW Filter Kit
• 0 4. Mount C 13 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 0 5. Locate capacitor C14 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J" on the body. (actual value in pF).
• 0 6. Mount C 14 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 0 7. Locate capacitor C15 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J' on the body. (actual value in pF).
• 0 8. Mount C15 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 0 9. Locate capacitor C16 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J" on the body. (actual value in pF).
• 010. Mount C16 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 011. Locate capacitor C17 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J" on the body. (actual value in pF).
• 012. Mount C17 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 013. Locate capacitor C18 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J" on the body. (actual value in pF).
• 014. Mount C 18 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 015. Locate capacitor C19 (1000pF). The is a polystyrene capacitor and will
be marked with a "1000J" on the body. (actual value in pF).
• 016. Mount C19 and solder both leads in place, making sure the capacitor
remains seated. Remove excess leads on the bottom side of the board
with diagonal cutters.
• 017. Locate capacitor C2 (.1uF). This is a disc ceramic type capacitor and
will be marked "104" or "104Z" (actual value in uF). Carefully