TVLogic LVM-170A - Manual (Page 41)

Multi Format LCD Monitor 41
[1] SOFTWARE UPGRADE
6. Firmware Upgrade
●
USB memory stick(Thumb drive) that has
F/W is necessary.
●
Select Display&Set menu
- Connect USB memory stick to USB slot in
front of the monitor.
- Set [S/W upgrade] as [On].
- If USB memory stick is connected correctly,
[S/W upgrade start] is activated.
* if the item is not activated, please disconnect
and connect the USB memory stick again.
After 5 sec. do the same procedure.
- The monitor searchs USB memory stick. - Select [Yes] in [S/W upgrade start] and
proceed the firmware update.
* During the update, the monitor screen is off,
and nothing functions.
* After the update, TVLogic logo shows up on
the screen, and the monitor initializes.
* Update can take 10~20min. depending on
firmware kind.