TVLogic LVM-170A - Manual (Page 18)

18 Multi Format LCD Monitor
3. Controls & Functions
LVM-182-A/232W-A : REAR
●
[REMOTE] (RJ-45)
- Provides connection to control equipment
for external monitor control.
- Features can be changed in the [REMOTE]
section of OSD menu.
●
[RS422 IN/OUT] (RJ-45)
- Controls the monitor by a protocol provided
by TVLogic or supports TSL protocol.
●
[DVI-I] (DVI-I)
- Signal input terminal for DVI ANALOG or DVI
DIGITAL signal.
●
[HDMI(HDCP)] (HDMI)
- Signal input terminal for HDMI signal.
●
[CVBS] (BNC)
- Signal input terminal for COMPOSITE signal.
●
[SDI-IN A] (BNC)
- Signal input terminal for 3G/HD/SD SDI
signal.
●
[SDI-IN B] (BNC)
- Signal input terminal for 3G/HD/SD SDI
signal.
●
[SDI-OUT] (BNC)
- Signal output terminal for 3G/HD/SD SDI
input signal through SDI-IN.
●
[Audio in] (PHONE JACK)
- Inputs external audio.
●
~ AC IN
- 100 ~ 240V AC 50/60Hz
DC 12/24V IN
- LVM-182W-A : 24V
- LVM=232W-A : 12V/24 DC
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera
or video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.
DC IN socket
1,2 : GND
3,4 : +12V / +24V