TVLogic LVM-170A - Manual (Page 28)

28 Multi Format LCD Monitor
●
This product provides a REMOTE
CONTROL mode. The user may connect
RJ-45 jack to the REMOTE terminal on the
rear of the unit and designate a function
for each pin.
●
The default settings are as follows:
PIN 1 : SDI-A Channel
PIN 2 : SDI-B Channel
PIN 3 : HDMI Channel
PIN 4 : TALLY R
PIN 5 : TALLY G
PIN 6 : User Scan
PIN 7 is POWER ON/OFF use only, PIN 8 is GND
●
The default settings are as follows
(LVM-170A) :
PIN 1 : ANALOG Channel
PIN 2 : Digital Channel
PIN 3 : SDI-A Channel
PIN 4 : SDI-B Channel
PIN 5 : TALLY R
PIN 6 : TALLY G
PIN 7 is POWER ON/OFF use only, PIN 8 is GND
- Use the ENTER button and UP/DOWN button
to set the desired function.
[4] GPI / UMD
5. Menu Operations
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
1 8
Menu
Classifi-
cation
Settable Values
PIN
1~6
NONE,
ANALOG CHANNEL,
HDMI CHANNEL,
SDI-A/B CHANNEL
TALLY RED,
TALLY GREEN,
BLUE ONLY,
UNDERSCAN,
ASPECT
HVDELAY,
16:9 MARKER,
15:9 MARKER,
14:9 MARKER,
13:9 MARKER,
4:3 MARKER,
4:3 ON AIR MARKER,
1.85:1 MARKER,
2.35:1 MARKER,
1.85:1 & 4:3 MARKER
CENTER MARKER,
SAFETY AREA 80%,
SAFETY AREA 88%,
SAFETY AREA 90%,
SAFETY AREA 93%,
SAFETY AREA 100%
Dynamic UMD,
Focus Assist,
CC608(ANC),
CC608(L21),
CC708
PIN 7 POWER ON/OFF CONTROL
PIN 8 GND