D-Link DVG-2101S - Manual (Page 4)

DVG-2101S User Manual
Introduction
2
Features
z
WAN support
„
One 10/100Mbps auto-MDI/MDIX Ethernet port
„
WAN Type: Static IP, Dynamic IP, and PPPoE
„ MAC Address Clone
„ NAT Traversal: Outbound Proxy, STUN
„ Dynamic DNS support: DlinkDdns, DynDns
„ VLAN ID Tag
„
QoS: IP Precedence
„
NTP
z
Management
„ Web-base, Telnet, and telephone keypad configuration (dial prefix)
„ Built-in Ping Tool
„ Remote firmware upgrade via TFTP, HTTP, HTTPS, and FTP
„ Multi-function reset button: IVR, reset , restore the factory default
„ Password Protected controlled Admin and User Access Authority
„
Auto Provisioning:
y
Web Browser Administration and Configuration via Integral Web
Server Telephone Key
y Pad Configuration with Interactive Voice Prompts, Automated
Provisioning & Upgrade via HTTPS, HTTP, TFTP,FTP
„ IVR
„ SNMP V1/V2C
„ TR-069 (include TR-104) (optional)
z
Call In & Call Out
„
Voice over IP Call
„
IP Address Calling
„ Three Way IP to IP Conference Call
z Call Features
„ Call Forwarding: No Answer/Busy/Unconditional
„ Call Transfer: Unattended/Attended
„
Call Waiting / Call Pickup / Call Hold / Call Back On Busy / Call Return
/ Three Way Calling (Media Server required)
„
MWI based on LED & Tone
„
DND (Do Not Disturb)
„
Warm Line
„ Hot Line
„ Selective/Anonymous Call Rejection
„ Music On Hold
„ Caller ID (Type I and Type II)
„
Caller ID Blocking
„
Speed Dialing, Repeat Dialing
„
Consultation Hold
z
Voice Functionality
„ SIPv2 (RFC3261) compliance
„ SIP Proxy Redundancy: Dynamic via DNS SRV, A Records Re-
registration with Primary SIP Proxy Server.
„ SIP Extension: Session Timer, Proxy-Require
„
MD5 Authentication for SIP