D-Link DVG-2101S - Manual (Page 11)

Configuration
DVG-2101S User Manual
9
Configuration
Prior to using your web browser for accessing the web-based configuration
utility, if DHCP is not enabled on your computer, be sure to assign a static IP
address to the VoIP Telephone Adapter.
Use the computer that was last connected directly to your Cable/DSL modem.
Right-click My Network Places > select Properties > right-click Local Area
Connection > select Properties > double-click Internet Protocol (TCP/IP).
In order to use a web browser to configure the VoIP Adapter you must make
sure it has a valid Ethernet connection to a PC or LAN via its LAN port. Access
the configuration utility to check the LAN port by entering the IP Address into
your web browser address field.
Set your PC’s IP address to
192.168.1.1 and the subnet
mask to 255.255.255.0. The
default gateway and primary
DNS server IP addresses
should be the LAN IP
address of the DVG-2101S
(192.168.1.150).
Open a web browser and type
http://192.168.1.150 into the
URL address box. Press the
Enter or Return key.
Click OK.
When you first log in,
enter the Username
admin and leave the
Password blank.
These may be
changed later.
Click the Login button.