Thor 1- 4 HDMI to QAM Modulators - Manual (Page 29)

H-4SDI-or-4HDMI-QAM-IP
field. After setting all the data, users need to click on “Save” to save the
setting. As Figure-7, click “Update NIT” to update the NIT
information.
Figure-7
IP Output
Click “IP Output” from the left menu, it will display the screen as Figure-8 where to
set the multicast IP Output address for the device if needed and set the IP output for
the programs.
After setting the parameters, click “Apply” to save the setting.
Figure-8
The 4 boxes represent the 4
SPTS out respectively.
To configure the
output IP address
and ports for the 4
SPTS respectively.