Thor 1- 4 HDMI to QAM Modulators - Manual (Page 24)

H-4SDI-or-4HDMI-QAM-IP
4.2 Operation
When we confirm the login, it displays the WELCOME interface as Figure-2.
Figure-2
Input 1
From the menu on left side of the webpage, clicking “Input 1”, it displays the
information of the 2 programs from the 1
st
SDI encoding slot as Figure-3.
Device standard
and name
User can click any item
here to enter the
corresponding interface
to check information or
set the parameters.
It automatically
identifies and
displays the
signal source
interface and
real-time
encoding bit rate
of corresponding
input channel.
TS indicators—Green
light indicates the TS is
normal, which
otherwise turns to red.
“A”, “B”, “C” and “D” respectively represent
carrier A, carrier B, carrier C, and carrier D.