Thor 1- 4 HDMI to QAM Modulators - Manual (Page 22)

H-4SDI-or-4HDMI-QAM-IP
User can restore the device into the last saved configuration by choosing “7.1” and
restore the device into factory configuration by choosing “7.2” the display will show
as below:
8) Version
User can check the software version and hardware version of this equipment under
this submenu.
Load Saved CFG?
Yes
No
Loading Config…
7.1 Load Saved CFG
7.2 Load Default
Encoder Modulator
SW 1.00 HW 0.3