Thor 1- 4 HDMI to QAM Modulators - Manual (Page 25)

H-4SDI-or-4HDMI-QAM-IP
Figure-3
Enable or Disable the Carrier Output Function:
…..………………………………..... NOTE ……..……..………………………….
The different combination of Video Format, Video Bit-rate, Low Delay Mode and the
Resolution of signal source will have an impact on the delay. Please refer to the Appendix
attached for detailed information.
…………………………………………………………………………………………..……
The 4 boxes respectively represent Carrier A, B, C, and D. Tick the corresponding box(es)
to enable the related program output through the corresponding Carrier.
One program can output through a single or multiple Carriers. However, it is suggested
that a single carrier outputs only one program to adapt the fluctuant encoding bit rate.
Encoding Status—Green
light indicate it works
normally, which
otherwise turn to red.
This column is for setting
the 1
st SDI IN program.
This column is for setting
the 2
ed SDI IN program.
General
Settings for
the SDI IN
programs:
User can edit
any item listed
as needed.