D-Link DI-704UP - Manual (Page 93)

93
Frequently Asked Questions (continued)
What are virtual servers?
A Virtual Server is defined as a service port, and all requests to this port will be
redirected to the computer specified by the server IP. For example, if you have an FTP
server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN
server (port 1723) at 192.168.0.7, then you need to specify the following virtual server
mapping table:
Server Port Server IP Enable
21 192.168.0.5 X
80 192.168.0.6 X
1723 192.168.0.7 X
How do I use PC Anywhere with my DI-704UP router?
You will need to open 3 ports in the Virtual Server section of your D-Link router.
Step 1 Log into the web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and
the password is blank (empty).
Step 4 The first entry will read
as shown here:
Step 5 Click Apply and then
click Continue.
Step 3 Enter the information as
seen below. The Private IP is the
IP Address of the computer on
your local network that you want
to connect to.
pcanywhere1
Step 2 Click on Advanced at the
top and then click Virtual Server
on the left side.