D-Link DI-704UP - Manual (Page 75)

75
Resetting the DI-704UP
to the Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
To hard-reset the D-Link DI-704UP to the Factory Default Settings, please do
the following:
„
„ Use a paper clip to press the Reset button and power on.
Locate the Reset button on the back of the DI-704UP.
„ After you have completed the above steps, the DI-704UP
will be reset to the factory default settings
„ Hold for about 5 seconds and then release. (Or release
when the status LED flashes.)
choose to Reset the DI-704UP to the factory default settings.