D-Link DI-704UP - Manual (Page 48)

48
Using the Configuration Menu (continued)
Tools > Admin
Remote Management:
Remote Management allows the DI-704UP to be configured from the Internet by a web
browser. A username and password is still required to access the Web-Management
interface. In general, only a member of your network can browse the built-in web pages
to perform “Administrator” tasks. This feature enables you to perform “Administrator”
tasks from the remote (Internet) host.
IP Address:
Internet IP address of the computer that has access to the Broadband Router. It is not
recommended that you set the IP address to 0.0.0.0, because this allows any Internet
IP address to access the Broadband Router, which could result in a loss of security
for your network. If you elect to Enable Remote Management, enter the IP Address of
your remote location.
Port:
Select the port number used to access the Broadband Router.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the Broadband
Router and 8080 is the port used for the Web-Management interface.
Tools > Time
The system time is the time used by the DI-704UP for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP
server is set, you will only need to set the time zone.