D-Link DI-704UP - Manual (Page 70)

70
Assigning a Static IP Address in Windows XP/2000
Note: Residential Gateways/Broadband Routers will automatically assign IP Ad-
dresses to the computers on the network, using DHCP (Dynamic Host Configura-
tion Protocol) technology. If you are using a DHCP-capable Gateway/Router you
will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router or you need to assign a Static IP
Address, please follow these instructions:
„
„
Go to Start
Double-click on
Control Panel
Networking Basics (Continued)
Naming your Computer
„ In this window, enter the
Computer name
Select Workgroup and enter
the name of the Workgroup
All computers on your network
must have the same
Workgroup name.
Click OK
„
„
„