D-Link DI-704UP - Manual (Page 85)

85
Frequently Asked Questions (continued)
How can I setup my router to work with a Cable modem connection?
Dynamic Cable connection
(i.e. Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast).
Note: Please configure the router with the computer that was last connected directly
to the cable modem.
Step 1 Log into the web based
configuration by typing in the IP
Address of the router
(default:192.168.0.1) in your web
browser. The username is admin
(all lowercase) and the password
is blank (empty).
Step 2 Click the Home tab
and click the WAN button.
By default, Dynamic IP
Address is the selected option.
Click Clone Mac Address.
Click on Apply and then
Continue to save the changes.