Pointmaker PVI 65 - Manual (Page 99)

Boeckeler Instruments, Inc. Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 89
Section Six: Commands for RS-232 Control Commands
(IM) Identify Mode for Multiple Users
The “IM” command designates the mode to use when multiple digitizing tab-
lets or touch screens are installed. When PRIORITY USER mode is selected,
users will also need to send the command designating which controller
(COMM #) is the priority user.
(L) Line Style
The “L” command determines the line style to use when drawing a freehand
line, straight line or frame.
(PA) Pass-through
The “PA” command enables the video image to “pass-through” the system
without displaying the marker overlay.
(ICXXX Increases brightness level (relative). XXX is numeric value
between -256 and 256.
(IC-XXX Decreases brightness level (relative). XXX is numeric value
between -256 and 256.
(IMO Assigns Open Mode.
(IMS Assigns Selective Mode.
(IMP Assigns Priority User Mode.
(IMCXX Sets COMM port for Priority User.
XX = the COMM port (01-10) The port selected should be con-
nected to a digitizing tablet or touch screen.
(LF Fine or thin line.
(LSF Fine or thin line with drop shadow.
(LM Medium line.
(LSM Medium line with drop shadow.
(LB Bold line.
(LSB Bold line with drop shadow.
(PA1 Enable pass-through. (overlay is hidden)