Pointmaker PVI 65 - Manual (Page 96)

Page 86 - Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker Boeckeler Instruments, Inc.
Commands Section Six: Commands for RS-232 Control
(CL) Clear
The “CL” command clears the markers from the video overlay.
(CM) Marker Move
The “CM” command moves an active marker (pointer, frame, label or text or
date/time label) using the XY coordinate grid. (See “X-Y Coordinate Grid” on
page 83) The coordinates are: XXXX = a numeric value for the horizontal axis
point and YYYY = a numeric value for the vertical axis point.
(CS) Color Selection
The “CS” command handles color attributes of an active marker. These com-
mands will force an “enable” of the color selected without having to enable
that color using the “CE” commands or going to the Setup Menu.
(CL Clears All Markers
(CMXXXXYYYY Move an active marker to coordinates XXXX and
YYYY
Example: (CMØØ25ØØ37
(CSR Select Red
(CSW Select White
(CSB Select Black
(CSP Select Pink
(CSG Select Green
(CSY Select Yellow
(CSC Select Cyan
(CSN Select Next
sequence forward to the next available color that has
been enabled. (See “(CE) Color Enable” on page
85)
(CSD1 Display Color Change
display a sample block of the new color. May be
desired if a pointer is not being displayed. The
option may not be desired if users wish to change
colors during a live broadcast.
(CSDØ Do not display color change