Pointmaker PVI 65 - Manual (Page 103)

Boeckeler Instruments, Inc. Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker - Page 93
Section Six: Commands for RS-232 Control Commands
Font size commands can be assigned to the active text label after it is visible
on the screen:
(TC) Touch Screen Corner Control
The “TC” commands tell the Pointmaker to enable or disable the corner func-
tion areas on a touch screen (See “Touch Screen“ in “Section One: Getting
Started” on page 16)..
(U) Undo/Erase
The “U” command erases the last created anchored marker. Each time this
command is given, an anchored marker will be erased from the overlay, begin-
ning with the most recently anchored marker.
(V) Select an Overlay
The “V” command tells the Pointmaker which overlay to display.
(TSØ Small
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo,
Symbol, Map
(TS1 Medium
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo
(TS2 Large
works with:
TI Roman, Helvetica, TI Dom Casual, Fargo
(TS3 Extra Large
works with:
TI Roman, Helvetica, TI Dom Casual
(TCØ Disable corner function areas
(TC1 Enable corner function areas
(TC2 Toggle corner function areas
(U Undo the last anchored marker.
(V# Display overlay number specified.
replace # with overlay number desired.
(VN Display next overlay.
(VP Display previous overlay.