Pointmaker PVI 65 - Manual (Page 64)

Page 54 - Pointmaker PVI-65 HD/SD-SDI Broadcast Video Marker Boeckeler Instruments, Inc.
Comm Port Operations Section Four: Comm Port Devices Menu
Designating a Device Type
1. Activate the menu system.
(See “Activating the Menu“ in “Section One: Getting Started” on
page 25)
The Main Menu appears. (See Figure 1-14:, “PVI-65 Main Menu” on
page 26)
2. Select COMM PORT DEVICES.
The Comm Port Devices Menu appears (See Figure 4-1:, “Comm
Port Devices Menu” on page 50).
3. Select SERIAL PORTS.
Figure 4-1: Serial Ports Dialog
The Serial Ports dialog appears.
NOTE: All the serial ports installed on your PVI-65 are listed by port
number, with the device type displayed to the right of each number. If
the device type is in blue, it has been assigned through the autodetect
procedure at startup.
4. Select the device type you wish to have permanently assigned.
If the device type can be permanently assigned (some types cannot),
the color changes from blue to black. With the device permanently
assigned, the next time the PVI-65 is powered up, the autodetect pro-
cedure will skip this port. If the assigned device needs initialized at
startup, it will be initialized according to the device type listed.
C o n t r o l P o r t
u n k n o w n
1
2
SERIAL PORTS