Paxton Superchargers Dodge V-10 Truck - Manual (Page 16)

3-4
P/N: 4800019
©2003 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
25SEP03 v2.0 Dodge V-10(4800019v2.0)
Fig 3-j
B. Mount the power steering pump to the
front plate using two of the stock bolts
and two of the supplied countersunk
bolts. (See Fig. 3-j.)
Fig 3-i
F. Remove the current spark plugs and
replace with copper plugs (AutoLite
#5224 or equivalent) gapped at .035. Do
not use platinum spark plugs with the
supercharger.
3.4 SUPERCHARGER BRACKET:
A. Install the backing plate to the front of
the engine with one 3/8" x 1" bolt and a
second 3/8" bolt as an alignment bolt as
shown. Torque the first bolt to 28-30
ft/lbs. Remove the alignment bolt (See
Fig. 3-i.)