One Systems Natatorium - Manual (Page 2)

2
steels consisting of 6% molybdenum are excellent choices. There are several super
austenitic grades that are very strong and well suited for structural members due to their
excellent SCC resistance. These grades are recognized by several European countries as
being the only acceptable stainless steels for use in Natatorium environments where they
are load bearing and above the “splash” zone and not routinely washed or cleaned. One
Systems uses AL6XN (N08367) material. Other materials are 1.4547 and 1.4529 6%Mo
stainless steels.
NOTE: ONE SYSTEMS DOES NOT RECOMMEND MOUNTING
IT’S PRODUCTS DIRECTLY TO THE NATATORIUM
STRUCTURAL STEEL DUE TO THE
COMPLEXITY OF THE GALVANIC
ISOLATION DESIGN AND THE CORROSIVE NATURE
OF THE ENVIRONMENT! (Contact One Systems for
additional information.)
NOTE: THIS MANUAL DOES NOT COVER THE USE OF WIRE
ROPES OR OTHER SUSPENSION METHODS
CONNECTED TO THE STRUCTURAL STEEL OF THE
BUILDING!
NOTE: STAINLESS STEEL WIRE ROPES ARE NOT
RECOMMENDED FOR USE IN
NATATORIUM (INDOOR SWIMMING POOL)
ENVIRONMENTS FOR LOUDSPEAKER SUSPENSION!
NOTE: DO NOT ATTEMPT ANY OF THE OPERATIONS IN THIS
MANUAL IF YOU DO NOT FULLY UNDERSTAND THEN! ALWAYS
CONSULT AN EXPERT WITH EXPERIENCE IN THE OPERATIONS
NOTED IN THIS MANUAL!