NEXCOM VTC 7100-D1K - Manual (Page 94)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 80
Appendix E: Vehicle Power Management Setup
VTC 71-D Series User Manual
Set the startup voltage to 12.5V or 25V and the shutdown volt-
age to 11.0V or 22V
If the input voltage is 12V: the startup voltage to 12.5V and the shutdown
voltage to 11.5V.
If the input voltage is 24V: the startup voltage to 25V and the shutdown
voltage to 23V.
Power-on Delay Setting
Disable Power-on Delay
Advanced
Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Startup,Shutdown Setting Power Management Configuration
** External +12V & By Pass Car Battery Setting **
External Power
** External +12V & By Pass Car Battery Setting **
Input Voltage
Startup.Shutdown
**Delay Time Setting**
Power On Delay
Power Off Delay
[Turn On Both]
9-36V
[(11.5.10.5)/(23,21)]
Startup,Shutdown
(11.5, 10.5) / (23,21)
(12.0, 11.0) / (24,22)
(12.5, 11.5) / (25,23)
(12.5, 11.0) / (25,22)
Advanced
Version 2.14.1219. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
External +12V & By Pass Car
Battery Poewer Setting Power Management Configuration
** External +12V & By Pass Car Battery Setting **
External Power
** External +12V & By Pass Car Battery Setting **
Input Voltage
Startup.Shutdown
**Delay Time Setting**
Power On Delay
Power Off Delay
[Turn On Both]
9-36V
[(11.5.10.5)/(23,21)]
[Disable]
[Disable]