beautypg.com

Nct6106d super io configuration, Serial port 0 configuration – NEXCOM NDiS M533 User Manual

Page 60

background image

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

46

NDiS M533 User Manual

Chapter 4: BIOS Setup

NCT6106D Super IO Configuration

This section is used to configure serial ports 0 and 1.

NCT6106D Super IO Chip
Displays the Super I/O chip used on the board.

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Set Parameters of Serial Port

0 (COMA)

NCT6106D Super IO Configuration

NCT6106D Super IO Chip

Serial Port 0 Configuration

Serial Port 1 Configuration

NCT6106D

Serial Port 0 Configuration

This section is used to configure serial port 0.

Serial Port
Enables or disables the serial port.

Change Settings
Selects an optimal setting for the Super IO device.

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable or Disable Serial Port
(COM)

Serial Port 0 Configuration

Serial Port

Device Settings

Change Settings

[Enabled]

IO=2F8h; IRQ=5;

[Auto]