NEXCOM NDiS M533 - Manual (Page 55)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 41 NDiS M533 User Manual
Chapter 4: BIOS Setup
CPU Configuration
This section is used to configure the CPU.
Exit Advanced Chipset PCIPnP Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for Hyper-
Threading Technology) and
Disabled for other OS (OS not
optimized for Hyper-Threading
Technology). When Disabled
only one thread per enabled core
is enabled.
CPU Configuration
Intel(R) Core(TM) i5-4400E CPU @ 2.70GHz
CPU Signature 306c3
Processor Family 6
Microcode Patch 12
FSB Speed 100 MHz
CPU Speed 3200 MHz
Processor Cores 2
Intel HT Technology Supported
Intel VT-x Technology Supported
Intel SMX Technology Supported
EIST Technology Supported
Hyper-threading [Enabled]
Intel Virtualization Technology [Enabled]
EIST [Enabled]
Turbo Mode [Enabled]
CPU C states [Enabled]
Enhanced C1 state [Enabled]
CPU C3 Report [Enabled]
CPU C6 report [Enabled]
C6 Latency [Short]
CPU C7 report [CPU C7s]
C7 Latency [Long]
Hyper-Threading
This field is used to enable or disable hyper-threading.
Intel ® Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
EIST
Enables or disables Intel
® SpeedStep.
Turbo Mode
Enables or disables turbo mode.
CPU C States
Enables or disables CPU C states.
Enhanced C1 State
Enables or disables enhanced C1 state.
CPU C3 Report
Enables or disables C3 report to the operating system.
CPU C6 Report
Enables or disables C6 report to the operating system.
C6 Latency
Configures short/long latency for C6.
CPU C7 Report
Enables or disables C7 report to the operating system.
C7 Latency
Configures short/long latency for C7.