NEXCOM NDiS M533 - Manual (Page 57)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 43 NDiS M533 User Manual
Chapter 4: BIOS Setup
Advanced Boot Security Save & Exit Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select AC power state when
power is re-applied after a power
failure.
Restore AC Power Loss [Power Off]
Power Control
This section is used to configure power state settings.
Restore on AC Power Loss
Power Off When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
Power On When power returns after an AC power failure, the system
will automatically power-on.
BIOS Security Configuration
This section is used to configure the BIOS security settings.
BIOS Lock
Enables or disables BIOS lock enable (BLE) bit.
RTC RAM Lock
Enables or disables bytes 38h-3Fh in the upper and lower 128-byte bank of
RTC RAM lockdown.
Advanced Boot Security Save & Exit Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable BIOS lock
enable (BLE) bit.
BIOS Security Configuration
BIOS Lock
RTC RAM Lock
[Disabled]
[Disabled]