Installing a gps module (nvis 3542 series only) – NEXCOM NViS 3542 User Manual
Page 90
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
73
Chapter 3: System Setup
NViS 3540/3540H/3540P4/3540P8 and NViS 3542/3542H/3542P4/3542P8 User Manual
Installing a GPS Module (NViS 3542 Series Only)
1. Locate the GPS module’s mounting hole on the motherboard.
2. Place and align the mounting holes on the GPS module with the
mounting holes on the chassis.
3. Tighten screws on the mounting holes to secure the module.
4. Connect the GPS module connector to the GPS connector on the
motherboard.
Mounting
holes
GPS module
connector
GPS connector
GPS cable way
This manual is related to the following products: