NEXCOM NViS 3542 - Manual (Page 26)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 9 NViS 3540/3540H/3540P4/3540P8 and NViS 3542/3542H/3542P4/3542P8 User Manual
Chapter 1: Product Introduction
Hardware Specifications
NViS 3540 Series
Main Board
• NISB 3500
• Onboard Mobile Intel
® QM57 Platform Controller Hub
• Supports Intel ® Core™ i7-620M PGA Processor (2.66GHz, 4M Cache)
• Supports Intel ® Core™ i5-520M PGA Processor (2.4GHz, 3M Cache)
• Supports Intel ® P4500 PGA Processor (1.86GHz, 2M Cache)
Main Memory
• 2x 240-pin memory DIMM, up to 4GB DDR3 800/1066MHz SDRAM,
unbuffered and non-ECC
Note: The actual memory size is dynamic. It is based on the OS I/O re-
source allocation.
I/O Interface - Front
• ATX power on/off switch
• HDD Access / Power status LEDs
• 2x USB 2.0 ports
• 2x eSATA ports
• 1x 2.5” HDD with Hot Swap (NViS 3540/3540H/3540P4 only)
I/O Interface - Rear
• 2-pin Remote Power on/off switch
• 9 ~ 30V DC input
• 1 x PS/2 for Keyboard/Mouse
• 1 x DB15 male connector for GPIO (4x digital-input and 4x digital-out-
put)
• 1 x DB44 Serial Port for 4x RS232
(COM2: RS232/422/485 with Auto Flow Control)
• 2 x Gbe LAN ports
• 4 x USB 2.0 ports
• 1 x DB15 VGA port
• 1 x DVI-D Port
• 1 x Speaker-out
• 1 x Mic-in
Device
• 2x 2.5” HDD drive bays (NViS 3540P8 only)
• 1x 2.5” HDD drive bay and 1x 2.5” hot swappable drive bay (NViS
3540/3540H/3540P4 only)
Expansion
• 1 PCI expansion slot (NViS 3540 only)
• 1x 4-channel Hybrid capture card (NViS 3540H only)
• 4 ports PoE switch (NViS 3540P4 only)
• 8 ports PoE switch (NViS 3540P8 only)