5 mcu gpio setting, 6 wdt setting – NEXCOM NViS 3620 User Manual
Page 67
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
53
Appendix A: Software Demo Utility for I/O Ports of Function Control
NViS3620/3720 series User Manual
1.5 MCU GPIO Setting
1.5.1 MCU GPO Set
Selects MCU GPO ports and makes the output low or high.
1.5.2 MCU GPI Status
Shows the status of the MCU GPI.
1.6 WDT Setting
Enables or disables the WDT function. There are 9 selections of time. The
timer of WDT can also be cleared by Clear Timer button.
1.5.3 Event Button Read
Shows the status of Event Button.
Normal: 0 (default)
Triggered: 1
1.5.4 Event Record Clear
Clears the event record in MCU.
This manual is related to the following products: