Installing a wlan module (half mini-pcie), Installing the first wwan module – NEXCOM NViS 3620 User Manual
Page 60
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
46
Chapter 4: System Setup
NViS3620/3720 series User Manual
Installing a WLAN Module (Half Mini-PCIe)
1. Locate the WLAN Mini PCI Express slot (CN22). Insert the module into
the Mini PCI Express slot at a 45 degrees angle until the gold-plated
connector on the edge of the module completely disappears inside the
slot. Then fasten screws into the mounting holes to secure the module.
Installing the First WWAN Module
1. Locate the WWAN Mini PCI Express slot (CN23). Insert the module into the
Mini PCI Express slot at a 45 degrees angle until the gold-plated connector
on the edge of the module completely disappears inside the slot. Then
fasten screws into the mounting holes to secure the module.
Mounting
screws
Mounting
screws