2 north bridge configuration – NEXCOM NEX 883 User Manual

Page 41

Chapter 3: Uefi Setup Utility

NEX 883 User Manual

3.3.2 North Bridge Configuration

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assign the appropriate frequency automatically.
Primary Graphics Adapter
This allows you to select [Onboard], [PCI] or [PCI Express] as the boot
graphic adapter priority. The default value is [PCI Express].
VT-d
Use this item to enable/ disable Intel

Virtualization Technology for

Directed I/O.

PCIE1 Link Speed
This allows you to select PCIE 1 Link Speed. The default value is [Auto].
Share Memory
This allows you to set onboard VGA share memory feature. The default
value is [Auto].
IGPU Multi-Monitor
This allows you to enable or disable IGPU Multi-Monitor. The default value
is [Disabled]. If you wish to install a PCI Express card under Windows

/ Vista

OS, please disable this option.

Render Standby
Use this to enable or disable Render Standby by Internal Graphics Device.
The default value is [Enabled].
Deep Render Standby
This allows you to enable or disable Deep Render Standby. The default
value is [Enabled].
Active LVDS
Use this to enable or disable the LVDS. The default value is [Enabled].
Panel Type Selection
Use this to select panel type.
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no
effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primary display. Configuration options: [VBIOS Default], [CRT], [DVI],
[HDMI] and [LVDS]. The default value is [VBIOS Default].

Exit

Advanced

Chipset

PCIPnP

Security

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save & Exit
F12: Print Screen
ESC: Exit

Select DRAM Frecuency.

VT-d Capability

DRAM Frequency

Primary Graphics Adaper

VT-d

PCIE1 Link Speed

Share Memory

IGPU Multi-Monitor

RenderStandby

Deep Render Standby

Actlve LVDS

Panel Type Selection

Primary IGFX Boot Display

Supported

[Auto]

[PCI Express]

[Disabled]

[Atuo]

[Disabled]

[Enabled]

[1600x900/18-bit/2-...]

[VBIOS Default]