Installing a dimm – NEXCOM NEX 883 User Manual

Page 19

Text mode
Original mode

Chapter 2: Installation

NEX 883 User Manual

Installing a DIMM

Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM

matches the break on the slot.

notch

break

notch

break

The DIMM only fits in one correct orientation. It will cause per-
manent damage to the motherboard and the DIMM if you force
the DIMM into the slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at

both ends fully snap back in place and the DIMM is properly

seated.