3 advanced screen – NEXCOM NEX 883 User Manual

Page 38

Chapter 3: Uefi Setup Utility

NEX 883 User Manual

3.3 Advanced Screen

In this section, you may set the configurations for the following items:
CPU Configuration, Northbridge Configuration, Southbridge
Configuration, Storage Configuration, Intel

Rapid Start Technology,

Intel(R) Smart Connect Technology, AMT Configuration, Super IO Configu-
ration, ACPI Configuration and USB Configuration.

Setting wrong values in this section may cause the system to
malfunction.

Instant Flash
Instant Flash is a UEFI flash utility embedded in Flash ROM. This conve-
nient UEFI update tool allows you to update system UEFI without entering
operating systems first like MS-DOS or Windows

. Just launch this tool

and save the new UEFI file to your USB flash drive, floppy disk or hard
drive, then you can update your UEFI only in a few clicks without preparing
an additional floppy diskette or other complicated flash utility. Please be
noted that the USB flash drive or hard drive must use FAT32/16/12 file sys-
tem. If you execute Instant Flash utility, the utility will show the UEFI files
and their respective information. Select the proper UEFI file to update your
UEFI, and reboot your system after UEFI update process completes.

Exit

Advanced

H/W Monitor

Boot

Security

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save & Exit
F12: Print Screen
ESC: Exit

Configure North Bridge Settings.

CPU configuration

North Bridge Configuraton

South Bridge Configuration

Storage Configuration

Intel(R) Rapid Start Technology

Intel(R) Smart Connect Technology

AMT Configuration

Super IO Configuration

ACPI Configuration

USB Configuration

UEFI Update Utility

Instant Flash