NEXCOM NEX 883 User Manual

Page 33

Text mode
Original mode

Chapter 2: Installation

NEX 883 User Manual

2.7 Serial ATA2 (SATA2)/ Serial ATA3
(SATA3) Hard Disks Installation

This motherboard adopts Intel

Q77 chipset that supports Serial ATA2

(SATA2) / Serial ATA3 (SATA3) hard disks and RAID (RAID 0, RAID 1 and
RAID 5) functions. You may install SATA2 / SATA3 hard disks on this moth-
erboard for internal storage devices. This section will guide you to install
the SATA2 / SATA3 hard disks.

Step 1. Install the SATA2 / SATA3 hard disks into the drive bays of your
chassis.
Step 2. Connect the SATA power cable to the SATA2 / SATA3 hard disk.
Step 3. Connect one end of the SATA data cable to the motherboard’s
SATA2 / SATA3 connector.
Step 4. Connect the other end of the SATA data cable to the SATA2 /
SATA3 hard disk.